Saturday, September 01, 2012

Warp finished

On the left is the first ondulé warp finished.
The top half is plain weave. Where you see a difference in the weaving lower down is where the 2/2 twill starts.
I still have to wash it, so will know tomorrow how it looks after washing.

Below is a small sample (plain weave + 2/2 twill) that I will keep unwashed for reference.

This was all about sampling. I've been playing with "when to move the reed". When the sample is washed I'm hoping to see a difference. I've marked on the side where I began a different rhythm.

I'm thinking about the next warp, with colour. Not sure when I'll be able to start this.
I want to go and see some textile exhibitions that are finishing soon.
Also have to think about the major paint job outside. The weather is good this week.
Thursday granddaughter will be coming for 3 nights. :-)

Wednesday, August 29, 2012

one more photo

Cally asked if my apron rod would pass through after the latest changes. The answer is no. I need to use a narrower rod as there is only about 60cm in between. The ondulé reed itself is 60cm wide.
So, here another photo to show this:
The green arrow shows what the maximum width is in between. I did not take a photo of the narrower apron rod itself. It's now wound onto the beam with the woven cloth.

Tuesday, August 28, 2012

Adjustments to loom

Here are a few photos to show what the adjustments look like now.
A more detailed photo from the front:
The green arrow points to the wood that is fixed to the Louet beater. The red arrows point to the original Louet parts. The blue arrows point to where the adjustments are made to move the reed up and down.
The back part looks like this:
The coloured arrows point to the same parts as the front photo. The yellow arrow points to another part fixed to the extra wood parts to stabilize it all. If this was not there it would wobble to much.

The original Louet beater stand was used and extra upper and lower reed holder were bought and cut. (By buying this extra, I'll be able to use the beater for normal reeds too with the original upper and lower reed holder). By cutting to size, it was possible to fix the extra wood parts (where the adjusting system is fixed on to) on the inside of the beater stand. A ruler was fixed to both sides so that it's easy to see how much to move up or down. I've been moving 0,5cm every time I move. With this warp I've moved between 8,5cm. This way I just stayed away from the top and bottom of the reed. By doing this, I have not had any more broken warp threads. I'm hoping that with stronger threads I'll be able to weave higher and lower as the total hight of the reed is 11cm.
I'll now post some photo's to Louet as I promised I would show them what my friend Toon has made.

I've almost woven this warp. It's easy to get into a rhythm, moving after every so many throws. My first sample I moved after every 4th throw up or down and for the rest of the warp I've been playing with doing this after every 6th and 8th throw. Woven plain weave but the last part I'm weaving twill just to see how that comes out. Once cut, I'll be able to show more samples.

Other activity

I've had my frontdoor changed. This has taken me several months. First choosing one, next ordering it and this week I had it fitted. It was a big job, the carpenter has been busy for nearly 2 days. The only thing doing now is painting the door.
But all of the woodwork outside needs painting. Next job is choosing colours and getting the paint.
I'm hoping for lots of dry days this next month :-)

On the weaving front, my first ondulé warp is almost woven.

Sunday, August 26, 2012

weaving the next sample

Last night I wove quite a bit on my 2nd sample. Changing the hight of the reed after every 6 throws (every 0,75cm), so getting a longer curve. The 1st sample I changed after every 4th throw (every 05,cm). You can see them here together.
I also want to make them even longer, say weave 1cm before changing, just to see how it will come out. By not weaving right up to the edge's, has made a difference to the yarn. So far no broken warp threads. It's fun weaving with this reed. Not as slow as I would have thought.

Back visiting museum

Today I went back to the Groninger Museum to have another look at Painting Canada that I went to see last month. The colours are so beautiful. This exhibition is on for another month, so I might even go back for a 3rd time to see them. They are so different and I've always wanted to visit Canada, that might have something to do with it. It's making me even more determend to go on a visit.
Last time I only saw the Canadian paintings but there was far more to see and that was another reason to go back to the museum. I was pleasantly surprised to see this. I did not think I would like it but I did. Reading about her work was very interesting. One work that was one of my favourites was this one. I like it that she uses a lot of textile in her work.
The third exhibition to see was work of a designer. Again interesting to read up on her thoughts behind her work. I'm glad I've seen it all.
I took along a friend, she had not been to Groningen before and it was only my 2nd visit. Last time I spent most time in the museum but now we walked about. As everything was closed it was nice to walk the streets without shoppers. We had an enjoyable lunch in a lovely place, it was almost empty when we came in but by the time we left it was buzzing with people.

Saturday, August 25, 2012

Washed sample

I've washed my first sample and I love the result!
The bamboo is a lovely yarn and after washing it feels nice and soft. It has shrunk about 10% in width and length.
I've now rethreading the reed and looking forward to weaving more. Still the bamboo yarn so will probably have more warp breakages. I will go not so far up and down this time and stay away from the finest part of the reed. Next warp for this reed will be a stronger yarn though, so that I will be able to weave right to the finest part of the reed.
Might also try weaving longer in each position (this sample I moved up/down every 0,5cm), getting longer curves and see how that looks.